Skip to content
9

Medical gas pipeline systems – design calculations

MGDC
3 days
Also available as an onsite course

Course Details

Course code
MGDC
Days
3 days
Category
Medical Gases
Tags
Healthcare
Accreditation
City & Guilds Assured
Training method
Scheduled | Onsite

The course will enable suitably experienced personnel to design or check designs of MGPS systems as identified by HTM 02-01.

ALSO AVAILABLE AS AN

ONSITE COURSE

WE CAN BRING THIS COURSE TO YOU

Get in touch today to discuss options with one of our specialist trainers.

Who is the course for

This course is for those with experience of medical gas pipeline systems and who are involved in the design or project management these.

It is suitable for existing Authorised Persons, project managers, contractors and consultants involved with MGPS installation.

Aims & objectives

The course will enable suitably experienced personnel to design or check designs of MGPS systems as identified by HTM 02-01.

 

BY THE END OF THE COURSE YOU WILL BE ABLE TO:

– Define the requirements for terminal units, AVSU’s and line valves including their location as HTM 02-01

– Interpret the requirements for alarm systems and locations as HTM 02-01

– Apply the requirements of plant and pipe work installation as HTM 02-01

– Apply the principles and algorithms in current guidance to the design of medical gas pipeline systems.

– Apply the requirements of secondary supplies and other back-up systems

Additional information

Learners should bring a copy of HTM 02-01 Parts A and B with them.

The ability to use Microsoft Excel is a requirement and learners should bring a laptop (or similar) with this installed. In the event that you do not have access to a laptop, please speak to Eastwood Park before you arrive.

It is an advantage to have completed Eastwood Park’s Authorised Person MGPS course or similar previously, however this is not essential.

Related courses

HTM 02-01 recommends that training for the role of Authorised Person should be undertaken: Authorised person MGPS (HTM 02)

Booking your course

This course is delivered on an on-demand basis and scheduled as needed. You can register your interest by following the link below and we will be in touch shortly to discuss your training options.

Take a look at where you will train

Our extensive practical facilities give learners the chance to gain valuable hands-on experience within a safe and controlled environment.

Course FAQs

If you are booked onto one of our Competent or Authorised Person courses then you need to bring suitable clothing for brazing and a pair of safety shoes or boots for cylinder handling.  Gloves and eye protection are provided by Eastwood park. Call our Sales team for advice on +44 (0)1454 262777.

To book one of our courses follow the ‘book now’ link above or call our sales team on  +44 (0)1454 262777.

Additional courses you may be interested in

Lift Safety | 1 day

Lift management duty holder

The course covers electric traction (including MRLs) and hydraulic lift installations. It is based around current legislation including the Lift Regulations 2016, PUWER, LOLER, British Standards, supplementary tests and HSE documents.

Next Course:
23rd January 2025
Decontamination | 2 days

Large porous load sterilizers – weekly testing (to NHS guidance)

This course will provide you with the knowledge and skills to safely complete routine checks and tests required to NHS guidance over a weekly period on clinical large porous load steam sterilizers.

Next Course:
18th November 2024
Medical Equipment | 1 day

Safety testing of electrical medical equipment (IEC 60601-1 + 62353)

The aim of this course is to provide the underpinning knowledge cf current electrical safety, regulations, standards, and best practice when applied during repeatable testing and test after repair of portable Medical Electrical,(ME), equipment.

Next course:
16th December 2024
SPEAK TO US